Marijuana Seed Pods

ILGM

Buy Cannabis Seeds Online

Growing weed in an AeroGarden: the complete step by step guide with everything you need to know along with pro-tips by experimented growers. Explore how to begin growing marijuana plants by comparing seeds versus cuttings, and learn how to acquire the seeds you need. Whether you are growing pot for personal use or for income, it is crucial to give your plants the best start in life possible. Just as with animals and children, healthy beginnings will encourage rapid, strong growth. You have two basic options for growing your own cannabis: start with seeds or use clones. If you choose the seed route, you will want to know the best way to germinate marijuana seeds. Experimenting with marijuana germination is your best bet for determining what’s right for you, since even seasoned growers often argue about the best methods for germinating marijuana seeds. And maybe you have been using trial and error but ended up thinking, “Why won’t my marijuana seeds germinate?”” Truth is, you’ve likely been making some mistakes without knowing it. You can increase your results, although some seeds inevitably will be duds. No one can attain 100% germination, but there is room for improvement regardless. DripWorks is happy to provide this primer on how to germinate marijuana seeds fast. These methods can get you and your seeds off to a good start. Select the Right Seeds Germination simply means getting a seed to sprout a taproot, which will serve as its main root into the soil as it grows. For the best results, start with the best seeds you can afford to buy online or get from friends. Choose between indica and sativa according to your preferences for cannabis effects or the market’s demand. You will also have dozens of strains to choose from. If possible, get feminized seeds. Because female pot plants produce the bodacious bud that cannabis connoisseurs crave, starting with feminized seeds will produce more buds when the plants mature. Feminized seeds won’t provide 100% female plants, but they will greatly increase your odds from the 50-50 chances of a standard seed selection. Germination How long does it take to germinate marijuana seeds? Typically, it will take anywhere from a couple of days to up to a week to see your seeds start to turn into plants. There are five basic germination methods that are popular. With any of these methods, remember that seeds will need adequate warmth, moisture, and air to germinate properly. Generally, cannabis seeds like a temperature of 70° F to 90° F for sprouting. Paper Towels The paper towel method is a favorite for many home growers. Simply take two pieces of paper towel. Moisten them with water. Then place your pot seeds in between the two layers of moist paper towels. Put a plate or other object under the bottom towel to prevent moisture damage and another over the top towel to keep the seeds in a dark space. When you see the white taproot emerge from your seeds, they will be ready to transplant. Make sure to plant them taproot down. Water Soaking Lots of folks like this simple, direct method. Simply soak your seeds overnight in a glass of lukewarm water. The next day, plant them directly in the ground, containers or wherever you plan to grow them. Direct Planting This is an even more natural method than water soaking. Just plant your seeds 1/2 inch to one inch deep in soil or another medium that has been moistened. A key benefit of this technique is that your seedlings won’t be subject to transplant shock. Because they have grown up in their surroundings, they will have acclimated to them. Jiffy Pots Some folks like to germinate their seeds in Jiffy Pots. You can buy these at nurseries and other places as little round disks. When you are ready to plant, just add water. They will expand into little individual soil pots you can use as a growing medium. Plant a seed or two in each pot, making sure to keep the pots moist. Once the plants sprout, you can transplant them in their Jiffy Pot to a container or to a raised bed or garden plot. Germination Station Also known as seed starters, germination stations are like mini greenhouses. They include a tray filled with soil and a heat pad underneath to keep the soil warm. A clear plastic cover on the top keeps the warmth in. You can make one of these at home or purchase one inexpensively at your local nursery or online. Simply plant your pot seeds in the growing medium and let them grow. When they are big enough, transplant them to a place where they will grow to maturity and harvest. To keep your crop growing well, check out other guides from our cannabis blog.

How to Grow Weed in your AeroGarden

Miracle-Gro AeroGarden™ is an exciting hydroponic system. You can grow fresh herbs, lettuce, tomatoes, year-round, in the comfort of your home.

You may be wondering: Is it possible to grow weed in an AeroGarden? And is it worth it? The short answer is Yes.

In this guide, I’m going to show you everything you need to know to grow weed your AeroGarden™ successfully including the best practices, the material needed, and exclusive pro-tips by experimented growers.

The best part? It will pay for itself in only 2 or 3 grows in weed value!

Table of contents
1. The Best AeroGarden Models For Weed

At the time I wrote these lines, the available models are; Sprout, Harvest, Classic, Bounty, and Farm family. To grow weed successfully, you will need a garden with 24 inches of growing height capacity and a powerful grow light panel.

So here are the AeroGarden models I recommend:

The AeroGarden™ Classic 9 is one of the most powerful models. It comes with a 45-watt LED full spectrum growth light and a growing height extendable up to 24 inches.

The Classic 9 also includes a touch screen control panel that makes things very easy and fun to control!

Classic 9 Bounty model has been replaced recently by a new design and this one is now obsolete but still one of the best to grow weed.

See also  Marijuana Seeds Not Sprouting

The most recent AeroGarden Bounty comes with a 40-watt grow light. The Bounty Elite (WiFi and Alexa Compatible) comes with a 50-watt grow light and both have 24 inches of growing height capacity.

Finally, the bigger models available are the AeroGarden™ Farm family with 60W of dual LED power and 24 inches of growing height.

2. Weed strain and seed type for the AeroGarden

Since the maximum grow height is only 24 inches (when the LED panel is fully deployed), it’s crucial to choose a strain that will stay small and compact.

Some strains can grow big plants that are not suited for the AeroGarden small reservoir. The strains also determine the effects and medical attributes.

2.1 Cannabis seed types

Autoflowering seeds are perfect for beginners because they grow very quickly and stay smaller. Also, there’s no need to change the light cycle to induce the flowering stage, and you will get only female plants.

Some strains can take only 10 weeks from seed to harvest.

On the other hand, yields are usually smaller with autoflowering seeds and most have a lower THC percentage.

Feminized seeds are also great, they allow growers to apply training techniques that aren’t recommended for auto and they can be cloned.

You will have to change the light cycle from 18/6 to 12/12 to trigger the flowering phase. Increased darkness hours tell the plant the fall is coming and start creating buds.

Key takeaway: Feminized seeds give more control to the experienced grower while autoflower seeds grow faster and are suitable for beginner grower.

2.2 Recommended marijuana strains for the AeroGarden
    – (Hybrid) – (Hybrid) – (Indica) – (Indica) – (Hybrid) – (Hybrid) – (Hybrid) – (Hybrid) – (Indica) – (Hybrid) – (Hybrid)
3. The shopping list

Now you have your AeroGarden™ and your seeds, you will need the material below, and the optional list will help to have more yield out of your grow.

3.1 Required
3.2 Optional products

Cannabis, like any other plants, needs calcium and magnesium.

Your tap water may have calcium and magnesium in small concentrations, but likely not enough.

If you’re using distilled water, you will need to add a Cal-Mag solution to your water as they are essential secondary nutrients for healthy plant growth.

Botanicare Hydroguard® is well known for their unique beneficial bacteria that help to increase root mass and health.

Pro-tip:

In my installation, I have added an external air pump with an air stone to make more bubbles in the root zone. This helps to prevent roots rot, and bring more oxygen to the roots.

The external pump also helps to reduce the usage of the AeroGarden™ built-in pump. The water temperature will stay low, and you will be able to keep an optimal temperature (between 65 and 80 degrees Fahrenheit).

On the top of the AeroGarden reservoir, you will find two water/air ports with rubber plugs that you can remove.

They are the same size as the standard aquarium airline tubing. Just place the tubing inside one of them and put the air stone in the center of the bowl.

4. Nutrients and the importance of pH

Important: don’t use the provided plant food that comes with the AeroGarden™. This will not work, and you will lose your time and seeds.

I use General Hydroponics Flora Series, and I always have great results with these nutrients. Some other popular alternatives are Advanced Nutrients and Botanicare.

Your AeroGarden™ Bounty holds approximately 4 liters of water. I pour this amount of water into a big stainless steel mixing bowl. Let the tap water sit for 24 hours to become chlorine-free or use distilled water.

Now it’s time to add nutrients to the water. Begin with half of the recommended dosage by the manufacturer.

If you’re using GH Flora Series, take a look at this fully-tested nutrient schedule.

4.1 pH control

The pH scale ranges from 0 to 14. The pH of the AeroGarden™ solution should be between 5.5 and 6.5.

So I target 6, and I check with the pH pen tester every day and make the required adjustments with pH buffers (do not use pH up and pH down in the same solution).

In the vegetative phase, the pH tends to go higher, and in the flowering stage, it tends to go lower. Keeping the pH in the target zone is essential. Out of this zone, the cannabis plant may be unable to absorb some nutrients, and this leads to nutrient deficiencies.

If the pH fluctuates a lot or is out of control for a long time, your plant leaves will become distorted especially in the new growth areas.

This can be reverted, but the affected leaves will not return to normal appearance.

Key takeaway: pH problems can slow the growth of your cannabis plants and lower your yield.

4.2 Total dissolved solids (TDS) & parts per million (PPM)

Before pouring the solution into the AeroGarden’s bowl, you need to verify the concentration of nutrient in the solution with the TDS digital meter.

In the first weeks, the PPM should be around 400, and this amount increase as the marijuana plants grows. In the early flowering stage, the TDS could be around 1000+ PPM.

High nutrient concentration levels will not help the plant to grow faster and can lead to problems like nutrient burn.

5. AeroGarden setup to grow weed

Now the fun part! I assume you have already assembled your hydroponic system and you have transferred the solution to the AeroGarden reservoir.

Now let’s take a closer look at the control panel. First, set the clock, and if you’re in the quick plant menu, select the grow anything option.

5.1 Grow light settings

Select the sun icon, and follow the steps to configure the grow light. If you have autoflowering seeds, I recommend 20/4 light cycle. My settings are as follow; light open at 6:00 am, and close at 2:00 am.

For feminized seeds, I suggest 18/6 for the vegetative stage, then switch to 12/12 to trigger flowering stage.

5.2 AeroGarden™ Pump settings

Select the water icon, and then change settings. Follow the steps until you reach the pump on/off screen.

See also  White Weed Seeds

In the vegetative stage, I recommend setting the pump 30 minutes on, and 60 minutes off.

In the flowering stage, it’s better to give an oxygen boost in the water for the increasing root masse of your plants. So, if you don’t have an external pump, set the pump to 60 minutes on, and 30 minutes off.

If you have the external air pump with an air stone, keep in mind this one should run all the time from seed to harvest. You can configure the AeroGarden built-in pump 10 minutes on, and 60 minutes off when you run the external pump.

5.3 Nutrients settings

Finally, select the nutrients icon, and then settings. Set your nutrients cycle to 7 days. This is a simple reminder, and the AeroGarden™ will give you a warning every week to add nutrients and replace the water.

6. Seed germination

I strongly recommend growing only one or two plants at a time. Your marijuana plants will need an increased amount of space while growing and try to put more plants will decrease the yield.

Take two grow sponges and baskets, then place the seeds into the small holes. Be sure seeds are not falling too deep, (1/2” would be awesome). Cover the two pods with the provided transparent domes and put duct tape over the remaining pod holes.

From my experience, it could take anywhere from 2 to 4 days to see the first tiny sprout.

How to Grow Marijuana from Seed

If you’re in a location where cannabis (another term for marijuana; short for the plant cannabis sativa) is illegal, growing it is probably illegal too. Bringing in seeds or cuttings to your location can very well be a felony, and reputable sellers won’t ship to you.

You can probably purchase and grow hemp seeds and plants, which have a negligible amount of THC, but these plants won’t produce the psychoactive effects of plants that contain higher levels of THC. Check with your seller to be certain you’re getting what you think you’re purchasing. If you buy seeds for CBD-only hemp plants by mistake, you can end up being very disappointed post-harvest.

How to acquire seeds or cuttings

You can usually find cannabis seeds for sale at most dispensaries in areas where growing cannabis for personal use is legal. You may also find growers who sell cuttings/clones. You can expect to pay $50 to $100 for a pack of ten seeds. When shopping for seeds or cuttings, read the labels and any other information the manufacturer provides on its website or in its catalog to make sure you’re getting the right seeds or cuttings (the strain) for the plants you want to grow.

One way to get your mitts on some seeds is to collect seeds when you find them in flowers you purchased, or get some from friends if they’re collecting.

  • Feminized seeds: Nearly all seeds sold by reputable companies are feminized, but make sure they are. These seeds are specially treated to grow into female plants.
  • Auto-flowering or photoperiod: Auto-flowering plants are easier, because they enter the flower stage after a certain number of weeks regardless of the light/dark cycle. If you’re a beginner, seriously consider going with auto-flowering plants.
  • Genetic background: If seeds are from a well-established strain, such as O.G. Kush, Bubble Gum, or a cross-breed, the genetic background should be stated.
  • Blend: The blend represents the percentage of the three species — sativa, indica, and ruderalis. All auto-flower strains contain some percentage of ruderalis, which is responsible for the auto-flowering nature of the plant.
  • Yield indoors: The number of grams of bud per square meter of plant when grown indoors.
  • Yield outdoors: The number of grams of bud per plant (after drying) when grown outdoors.
  • Plant height indoors: Shorter than when grown outdoors.
  • Plant height outdoors: Taller than when grown indoors.
  • Time to harvest: Approximate number of weeks after germination the flower should be ready to harvest.
  • Potency: Percentages of CBD and THC.
  • Effect: The type of experience you can expect when consuming product from the plant.

Know the laws about buying cannabis

  • In some European countries, laws prohibit growing cannabis, but seed is legal, which is quite confusing. You’re allowed to buy and eat cannabis seeds because they’re non-psychotropic, but you can’t buy them to grow cannabis. Other countries in Europe, such as Germany, have their own seed laws.
  • In Canada, where cannabis is federally legal, seeds can be shipped across provincial lines.
  • In the U.S., in some states in which cannabis is legal, you can purchase seeds from some dispensaries or other locations to grow plants as long as you keep them in the state. Other states may bar selling to non-licensed growers. Shipping or transporting seeds across state or international borders is illegal, although a few reputable online seed stores ship to individuals with success.

Cuttings are typically treated in a similar manner as seeds in legalized locations. They may be available from some dispensaries or outlets for pick up or delivery with a fee. They’re prohibited from crossing U.S. state lines or international borders. You can buy individual plants and mix and match strains. Prices vary and are often determined by plant size.

Buy cuttings (clones) only from a reputable source who understands proper back-crossing of strains for stability. Back-crossing involves pollinating a plant with one of its parent plants to promote sexual stability, so that when you have a female it won’t hermaphrodite into a male during flowering.

Both seeds and clones are often able to be purchased from commercial locations already in your state.

In the U.S., transporting any part of the cannabis plant over state lines is illegal. This applies to seeds and clones and, technically, even to tissue samples.

How to germinate cannabis seeds

Germinating seeds requires a dark environment that is around 70 degrees. There are many ways to germinate seeds (in soil, in a wet paper towel, in starter plugs) You can also sow them directly into soil in a garden or container, as long as the soil is light and fluffy, so the roots can easily grow down and the stalk can break through the soil. Plant the seeds about 1/4- to 1/2-inch deep and cover them loosely with soil.

See also  Marijuana Seeds Male Or Female

Most importantly, seeds need a moist environment; they won’t germinate if they get too dry. You can use a heat mat to increase the success of germination in colder climates.

How to transplant marijuana plants

When transplanting any plant, whether it started from seed or a clone, handle it gently, being very careful not to damage the roots. Center the plant in the pot, and plant it deep enough to cover the root ball completely in soil. If the plant is root bound, you can gently tease the roots apart to encourage outward growth.

Pack your soil or other grow medium down around the roots well enough to support the plant while new roots grow, but not so tight that the soil restricts outward root growth. Water the soil around the roots.

About This Article

This article is from the book:

About the book authors:

Kim Ronkin Casey has been a communications professional for more than 20 years and recently took a year-long leap into the world of cannabis as the communications manager for one of the leading dispensaries in North America. She now consults for companies in the industry on internal and external communications. Joe Kraynak is a professional writer who has contributed to numerous For Dummies books.

How to Germinate Marijuana Seeds

Whether you are growing pot for personal use or for income, it is crucial to give your plants the best start in life possible. Just as with animals and children, healthy beginnings will encourage rapid, strong growth. You have two basic options for growing your own cannabis: start with seeds or use clones.

If you choose the seed route, you will want to know the best way to germinate marijuana seeds. Experimenting with marijuana germination is your best bet for determining what’s right for you, since even seasoned growers often argue about the best methods for germinating marijuana seeds.

And maybe you have been using trial and error but ended up thinking, “Why won’t my marijuana seeds germinate?”” Truth is, you’ve likely been making some mistakes without knowing it. You can increase your results, although some seeds inevitably will be duds. No one can attain 100% germination, but there is room for improvement regardless.

DripWorks is happy to provide this primer on how to germinate marijuana seeds fast. These methods can get you and your seeds off to a good start.

Select the Right Seeds

Germination simply means getting a seed to sprout a taproot, which will serve as its main root into the soil as it grows. For the best results, start with the best seeds you can afford to buy online or get from friends.

Choose between indica and sativa according to your preferences for cannabis effects or the market’s demand. You will also have dozens of strains to choose from.

If possible, get feminized seeds. Because female pot plants produce the bodacious bud that cannabis connoisseurs crave, starting with feminized seeds will produce more buds when the plants mature. Feminized seeds won’t provide 100% female plants, but they will greatly increase your odds from the 50-50 chances of a standard seed selection.

Germination

How long does it take to germinate marijuana seeds? Typically, it will take anywhere from a couple of days to up to a week to see your seeds start to turn into plants.

There are five basic germination methods that are popular. With any of these methods, remember that seeds will need adequate warmth, moisture, and air to germinate properly. Generally, cannabis seeds like a temperature of 70° F to 90° F for sprouting.

Paper Towels

The paper towel method is a favorite for many home growers. Simply take two pieces of paper towel. Moisten them with water. Then place your pot seeds in between the two layers of moist paper towels.

Put a plate or other object under the bottom towel to prevent moisture damage and another over the top towel to keep the seeds in a dark space. When you see the white taproot emerge from your seeds, they will be ready to transplant. Make sure to plant them taproot down.

Water Soaking

Lots of folks like this simple, direct method. Simply soak your seeds overnight in a glass of lukewarm water. The next day, plant them directly in the ground, containers or wherever you plan to grow them.

Direct Planting

This is an even more natural method than water soaking. Just plant your seeds 1/2 inch to one inch deep in soil or another medium that has been moistened. A key benefit of this technique is that your seedlings won’t be subject to transplant shock. Because they have grown up in their surroundings, they will have acclimated to them.

Jiffy Pots

Some folks like to germinate their seeds in Jiffy Pots. You can buy these at nurseries and other places as little round disks.

When you are ready to plant, just add water. They will expand into little individual soil pots you can use as a growing medium.

Plant a seed or two in each pot, making sure to keep the pots moist. Once the plants sprout, you can transplant them in their Jiffy Pot to a container or to a raised bed or garden plot.

Germination Station

Also known as seed starters, germination stations are like mini greenhouses. They include a tray filled with soil and a heat pad underneath to keep the soil warm.

A clear plastic cover on the top keeps the warmth in. You can make one of these at home or purchase one inexpensively at your local nursery or online.

Simply plant your pot seeds in the growing medium and let them grow. When they are big enough, transplant them to a place where they will grow to maturity and harvest. To keep your crop growing well, check out other guides from our cannabis blog.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.