Making CBD Oil With Slow Cooker

CBDISTILLERY

Buy CBD Oil Online

Cannabis oil is an easy way to get the health benefits of cannabis, and it’s easy to make at home. Learn how to make cannabis oil with our at-home recipe. <b>This recipe is part of our <a href="http://www.buzzfeed.com/ateger/danksgiving">Danksgiving party menu</a>.</b> Learn how to make cannabis coconut oil at home. This dairy-free, plant-based, cannabis-infused oil can be used as a base in recipes and for beauty products.

How to Make Cannabis Oil at Home

Making your own cannabis oil at home is easy if you know a few tricks. Learn how to make canna oil in your kitchen with our complete recipe and step-by-step guide.

DIY Cannabis Oil: The Basics

Homemade cannabis oil offers a variety of health and wellness benefits. You may choose to mix the canna oil into another edible or beverage recipe, apply the canna oil topically, or place a few drops under your tongue like a cannabis tincture .

Canna oil has recreational uses as well as medicinal purposes. Here are a few therapeutic uses for cannabis oil:

These possible health benefits also depend on whether you use hemp or marijuana in your oil.

Hemp vs. Marijuana: Which Should You Use?

Hemp or CBD oil is a good choice if you live in a state where cannabis is illegal. CBD hemp oil may also be the right option if you want to avoid “getting high” from tetrahydrocannabinol (THC). Using marijuana with a full spectrum of cannabinoids may offer more potent therapeutic benefits through the entourage effect .

Dosing

Dosing is one of the most challenging issues with cannabis edibles , including canna oil. Too much THC can give you an unpleasant and lingering high. For this reason, it’s a good idea to consult with a physician who can provide you with proper dosing instructions for your body chemistry and level of cannabis experience.

Best Carrier Oil for Cannabis Oil

Many cannabis users report that coconut oil makes the best carrier oil for cannabis oil. Coconut oil contains beneficial fatty acids that go well in both edibles and topicals. However, alternatives to coconut oil also work well, such as vegetable oil or lecithin.

Using Lecithin

Lecithin is a type of fat that allows for ingredients to stick and bind together. Adding lecithin to your recipes and/or into your oil can help the canna oil bind together with other ingredients more readily and improve shelf life. Lecithin has the added benefit of increasing the bioavailability of cannabinoids. Sunflower lecithin is best for a range of diets. Eggs are also a source of lecithin and act as a binding ingredient in baking.

Why It’s Important to Decarboxylate Cannabis

Decarboxylating or “decarbing” cannabis refers to a chemical reaction where a carbon atom is removed from a carbon chain, resulting in the release of carbon dioxide (CO2). Key cannabinoids, like THC and CBD, convert from different original forms during the decarbing process.

For example, THCA (tetrahydrocannabinolic acid) is non-psychoactive in its raw form but becomes psychoactive as THC after decarboxylation. Likewise, CBDA (cannabidiolic acid) is the acid precursor to CBD and may provide its own health benefits .

To change THCA to THC and CBDA to CBD, the raw cannabis flower must be decarboxylated first. Decarboxylating also makes certain cannabinoids, such as CBD, more bioavailable (i.e., your body can process them more easily).

Cannabis Oil Recipe

The following recipe includes everything you need to make cannabis oil at home.

What You’ll Need

  • Rimmed baking tray
  • Baking paper
  • Crockpot, double boiler, or saucepan
  • Cheesecloth or strainer
  • Cooking twine to tie the cheesecloth

Ingredients

  • 3.5 grams of flower
  • 1/2 cup of cooking oil (coconut oil or olive oil)

Steps

Step 1

Break up any cannabis flower or “buds” you have into smaller pieces.

Step 2

Layer the pieces onto a rimmed baking tray lined with baking paper/parchment. Place the baking tray into the center of a preheated oven set to 240°F-248°F (115°C-120°C) for 30-40 minutes. Stir every 10 minutes.

Step 3

Allow the cannabis to cool to room temperature. It should appear darker in color – usually, light brown or yellow, and not as green as fresh cannabis.

Step 4

Once cooled, coarsely grind the cannabis and store it in an airtight container.

Step 5

Combine the cannabis and coconut oil using one of the following methods:

  • In a slow cooker or crockpot on low for about 4-6 hours, stirring occasionally.
  • In a double boiler on low for 6-8 hours, stirring occasionally – a simple heat-proof bowl over a saucepan of boiling water will suffice.
  • On the stove in a saucepan on low heat for 3 hours, stirring regularly. This method is the fastest but most susceptible to scorching. You can add a small amount of water to the oil to prevent scorching.

Note that the temperature of the oil should never exceed 245°F (118°C).

Step 6

Strain your canna-oil through a cheesecloth or strainer to get rid of the plant material.

Get Your Delicious Canna Oil Recipe

Alternative Method for Making Canna-Oil

You can also infuse raw cannabis directly in olive or coconut oil by first getting the cannabis-oil mixture to a temperature of between 212°F (100°C) and 230°F (110°C) to decarboxylate it. Then, simmer and double boil it for around 1- 2 hours at a temperature of between 158°F (70°C) and 199°F (93°C).

Double boiling ensures that the oil does not go above 212°F (100°C) after the initial decarboxylation, and means you can decarb the cannabis at a lower temperature over a few hours. However, we recommend decarboxylating the cannabis first rather than decarbing in the oil, which is more efficient.

If you’re double boiling decarbed cannabis, a temperature between 100°F and 120°F (38°C – 49°C) in a double boiler for between 1 and 5 hours is ideal. Use a cheesecloth to hold the raw or decarbed cannabis as you double boil it to avoid straining the oil afterward. Although raw cannabis can be added directly to oil, it is still best to decarb the cannabis first to maximize the shelf life of your oil. You can also use the leftover plant matter to make edibles.

Tips and Tricks for Making Homemade Canna-Oil

Follow these tips and tricks to make the best homemade canna-oil.

Always Cook at Low Temperatures

To retain any acidic cannabinoids, cook at lower temperatures or use the infused oil without cooking it. Once the oil has been infused, you can heat it to a maximum of 350°F (approx 176°C) to keep all the cannabinoids from burning off. We recommend cooking at below 284°F (140°C) or even 248 (120°C).

Extend Shelf-Life with Proper Storage

Cannabinoids do not last forever, and over time and exposure to light, air, and heat, your cannabis-infused oil will decrease potency. Acidic cannabinoids, in particular, are very unstable and do not last very long when exposed to the air.

Any impurities in the cannabis-infused oil will also affect how long a cannabis-infused oil will last. Therefore, properly straining any plant material from the oil is essential to prevent mold and bacteria growth.

Kept in a cool, dark place, cannabis-infused oil should retain its potency for about 1-1.5 years. Room temperature is appropriate if your indoor environment stays below 70 degrees Fahrenheit.

Infuse Oil to Retain Terpenes

Much of the flavor and effect of cannabis come from its terpenes and flavonoids . Infusing decarboxylated cannabis into oil will impart the flavor of the cannabis into the oil. While the terpenes and flavonoids may be pleasant when smelled (and even smoked or vaporized), the taste of cannabis when eaten is not usually as pleasant. Many people try to overcome the taste with sugar, hence the huge variety of medicated sweet treats like pot brownies .

Strain to Help Get Rid of Unpleasant Tastes

Straining away the plant material from the oil will reduce the unpleasant taste but not eliminate it. Matching the flavor profile of the cannabis-infused oil to the dish is possible but not easy considering the number of terpenes and terpenoids at play. Other ingredients can mask the flavor, as can infusing the oil with other herbs and spices.

See also  CBD Beard Oil

Reach out to one of the qualified physicians at Leafwell to learn more about the health benefits of canna oil and other cannabis products. Our doctors are here to help you quickly apply for a medical marijuana card.

How Can I Legally Buy Cannabis to Make Canna Oil?

Stay informed about the current cannabis laws in your state to know if you can legally buy cannabis to make canna oil.

Is Canna Oil the Same as CBD Oil?

No. The difference between canna oil and CBD oil comes down to THC. Canna oil contains a significant amount of THC, while CBD oil contains only trace amounts of THC, i.e., not enough to have psychoactive effects.

How Long Does It Take to Make Cannabis Oil?

If using a double-boiler, the infusion process to make canna oil takes approximately 6 to 8 hours until you have a final product.

How To Make Cannabis Oil In Your Slow Cooker

Oils with the highest fat content, such as olive and coconut, will absorb more cannabinoids (THC/CBD), resulting in higher potency. Canola oil also works well as it is mild in flavor and can be incorporated into many recipes. I choose to make my oil in a Crock-Pot. It’s a super easy method that requires very little baby-sitting.

INGREDIENTS

1 to 1.5 ounces of dried cannabis (depending on quality/strength)

Pot or large bowl

Fine mesh strainer

1. Pour oil into the Crock-Pot.

2. Add cannabis and stir to completely cover herb with oil.

3. Heat on lowest setting for 3 hours.

4. Allow mixture to cool (8-9 hours).

5. Repeat heating and cooling process up to two more times for increased potency.

6. Pour the oil/herb mixture through the strainer and into your bowl/pot.

Easy Crockpot Cannabis Coconut Oil

Published: Jun 9, 2020 · Modified: Nov 19, 2021 by Emily Kyle · This post may contain affiliate links, as an Amazon Associate I earn from qualifying purchases.

This easy, step-by-step beginner’s guide will teach you how to make cannabis coconut oil at home in a crockpot. It is perfect for anyone who wants to learn how to make a cannabis-infused oil that is vegan, dairy-free, and versatile enough to be used as a base for recipes and self-care products.

Features

  • A fan favorite with over 950+ happy reviews!
  • Just 2 simple ingredients needed: cannabis flower & coconut oil.
  • No special equipment required! You just need a basic crockpot and some mason jars. (Check out this guide if you want to use an Instant Pot, instead.)

Why You Will Love This Recipe

Cannabis coconut oil can serve as a cannabutter alternative and is an important staple recipe for any cannabis consumer to master alongside cannabis olive oil.

Making infused cannabis coconut oil is a fairly straightforward process that uses both heat and fat to decarboxylate the cannabis flower and extract the cannabinoids from the plant.

This process extracts a full spectrum of cannabinoids and other plant compounds from the plant.

The final product is a cannabis-infused oil that can then be used to make more specific cannabis recipes like the ever-popular cannabis brownie, chocolate chip cookies, and more.

Looking For More Support?

Join thousands of members inside my private Well With Cannabis Community to ask questions, find support, and share your edible creations!

Ingredient Notes

  • Coconut Oil – Coconut oil is great because it is solid at room temperature, but easily melts. You can choose between refined and unrefined coconut oil, further explained below.
  • Cannabis Flowers – You will need your desired amount of cannabis flowers, ranging from 3.5 grams up to 1 ounce. Choose THC flower, CBD flower, or CBG flower. You can purchase them from your local dispensary or purchase hemp flowers from my online shop here.
  • Lecithin, optional: lecithin is a natural emulsifier that will help keep opposing ingredients bound together, like water and oil. If you’re new to working with lecithin, you can learn more about adding lecithin to edibles here. If needed, you can purchase liquid lecithin or powdered lecithin. This ingredient is optional.

Note: a complete list of ingredients with amounts and printable instructions is located in the recipe card below.

The Step-by-Step Process

  • Step 1 – Create a water bath that stays at approximately 180-190° F. The printable instructions below are for using a crockpot to create the water bath.
  • Step 2 – While the water bath is heating, measure and decarb the flower. Use my traditional oven or Instant pot decarboxylation tutorials, if needed.
  • Step 3 – Add the flower and oil to mason jars. If you plan on using sunflower lecithin, add it to the mason jars now. Add the lid.
  • Step 4 – Place the jars in the water bath. Place the lid on the crockpot. Leave it alone to infuse for 4 hours. After 4 hours, remove the jars from the water to cool.
  • Step 5 – Whether it be a paper filter and funnel, cheesecloth, French press, or a simple coffee filter, you will want to set up a straining station to separate the plant matter from the oil.
  • Step 6 – Strain the prepared oil. You can save the leftover cannabis pulp for use in future recipes.
  • Step 7 – Return the prepared oil to whatever jar you would like to store it in; a mason jar works well.
  • Step 8 – Store the prepared cannabis coconut oil in a cool, dry place.

Note: complete step-by-step printable instructions are located in the recipe card below.

Storage Instructions

Store your prepared oil in a cool, dry place. It will last longer if stored in the refrigerator and even longer if stored in the freezer.

Why Coconut Oil Is Great For Infusions

I help educate my Cannabis Compass Online Course students about how they can learn to confidently use cannabis to improve their quality of life.

Many of my students follow a gluten-free and dairy-free diet, which is why I wanted a cannabis-infused butter alternative that was dairy-free.

Coconut oil is the perfect substitute for butter when in need of dairy-free or vegan cannabutter.

The coconut oil performs similarly to the butter in extracting the cannabinoids from the plant matter, and it remains solid at room temperature like butter.

Coconut oil is naturally dairy-free, vegan, vegetarian, plant-based, and allergen-friendly, and this is the product we use and recommend when making our own at home.

This cannabis-infused coconut oil is a great option for anyone following a specialty diet or just looking for an alternative to traditional cannabutter.

Choose A Type of Coconut Oil

There are many different types of coconut oil on the market today, the three most common being unrefined coconut oil, refined coconut oil, and MCT coconut oil.

It is ultimately your decision on which type of oil you want to infuse, but here are some important considerations when making your decision.

Virgin or Unrefined Coconut Oil

Virgin or unrefined coconut oil is about as close to the natural substance as you can get.

Unrefined coconut oil is made from the ‘meat’ of fresh coconuts and then cold-pressed, leaving just the oil which has a pure coconut flavor. Unrefined coconut oil has a more natural, more prominent, topical coconut taste and smell.

Like refined coconut oil, unrefined coconut oil is 63% MCTs and 50% lauric acid, meaning it infuses the same. If you choose to use unrefined coconut oil, this is the organic virgin unrefined coconut oil we recommend.

Refined Coconut Oil

Refined coconut oil is an oil made from dried coconuts that have been put through additional processing.

Some companies use harsh chemicals to bleach the coconut to remove the taste and flavor, while others use steam to refine the oil.

The biggest draw to refined coconut oil is that it has a very neutral taste and flavor, making it easier to work within certain recipes where the coconut taste is not wanted.

Many people prefer refined coconut oil because it has a less prominent coconut taste. Like unrefined coconut oil, refined coconut oil is 63% MCTs and 50% lauric acid, meaning it infuses the same.

See also  Pfizer CBD Gummies

If you choose refined coconut oil, you will always want to make sure you choose a sustainably farmed organic steam refined coconut oil like this one we recommend.

MCT Coconut Oil

MCT oil is a type of saturated fat extracted from coconuts that are rapidly digested and absorbed by the body. Many people prefer liquid MCT oil for infusions because it is tasteless and remains liquid at room temperature.

“Medium-chain triglycerides (MCTs) are a unique type of fatty acid naturally found in coconuts that support the metabolism and are easily digested and burned by the body for energy and fuel” (1).

The process for infusing MCT cannabis oil is the same as refined or unrefined coconut oil, although we do have a special guide for making MCT-infusion here.

One important thing to note is that MCT oil in large amounts may cause digestive distress in some individuals.

If you choose to use type oil, this is the MCT oil product we recommend.

Don’t Forget To Decarb

Before getting started, it is important to note that consuming dried or raw cannabis flower buds will provide little to no intoxicating effect at all.

If you do not decarboxylate, you will reap the health benefits of CBDA or THCA, which are non-intoxicating.

However, most people want to feel the full effects of activated CBD flower or THC flower when making edibles.

For this recipe, we decarboxylated our cannabis flower in the oven before combining it with coconut oil and placing it into the crockpot. Therefore, we can have a shorter cooking time, about four hours.

You can also decarb in an Instant Pot, if you have one.

If You Forget to Decarb

While I recommend going through the full decarb process for maximum benefits, truthfully, you can skip the decarboxylation process altogether.

You will simply increase your cooking time which will help you achieve decarboxylation over time. If you don’t decarb first, I recommend infusing the coconut oil for longer than the typical 4 hours, going for at least 8 hours.

This longer cooking time helps to decarboxylate the flower for you. If you accidentally forget to decarb, you can relax, all is not lost.

Additional Factors to Consider

If you asked 100 different Chefs, you would likely get 100 different variations on how to make your own cannabis-infused oil at home. Many factors can affect your results when cooking with cannabis.

Here are a few additional considerations to keep in mind:

Temperature Controls

It is important to keep tight temperature controls when cooking with cannabis.

While heat is needed to decarboxylate the acids into the active form of cannabinoids our bodies can use, extreme temperatures can destroy many important plant materials that contribute to positive health outcomes, like terpenes.

Each terpene may have its own therapeutic health benefits, but it also carries its own sensitivity to heat.

If cannabis is heated above 300° Fahrenheit for a prolonged period of time, you run the risk of denaturing many important plant compounds.

For this reason, we recommend using an instant digital-read thermometer during your cooking process to ensure you never go above the safe temperature threshold.

You may also want to invest in a machine that can decarboxylate and infuse for you, like the Ardent infusion machine or LEVO infusion machine.

The Strain of Cannabis Used

The strain of cannabis flower you are using will impact decarboxylation time and temperature recommendations.

Each cannabis strain contains varying amounts and ratios of different cannabinoids and terpenes.

Because each cannabinoid and terpene decarboxylates at a different temperature, you will want to consider the best temperature and cooking time for your particular strain.

Additionally, the final potency and intoxicating effects will vary depending on whether it is a THC or CBD-dominant strain.

There are CBD dominant flower options and THC dominant cannabis flower options to choose from.

The Freshness of Product

You will have noticeable differences in the final product depending on the freshness of the material you start with.

Cannabis coconut oil can be made with raw cannabis leaf trimmings to make a CBDA or THCA dominant oil and it can also be made with traditionally dried and cured flower buds.

The concentration of cannabinoids will vary with the freshness of the starting material, the cannabinoid concentration of the material, which will ultimately impact your final product’s potency.

Equipment Variability

You can make cannabis coconut oil with various pieces of equipment like a crockpot or slow cooker or Instant Pot, but small variables in the cooking equipment may impact your final product.

Different crockpots will have different temperatures when setting to the same setting, which is why we recommend a digital thermometer be used throughout the cooking process.

Frequently Asked Questions

Below are some other important considerations before making your own cannabis-infused coconut oil and answers to the most frequently asked questions from my Well With Cannabis Community.

In theory, using lecithin will make valuable cannabinoids like CBD and THC more bioavailable or ready for use by the body, ultimately making the edible stronger. You will definitely still have a great infused cannabis oil if you don’t use lecithin, it’s not a make or break ingredient for this recipe.

Yes, you can infuse coconut oil with full-extract cannabis oil, FECO (or RSO), instead of flowers. If you want to infuse with this type of oil, here is my guide on making FECO.

After the straining process to separate the plant matter from your infused oil, you will be leftover with a ball of spent cannabis flower, also called leftover pulp or sludge.

Yes, just use the cannabis flower to oil ratio chart below to choose the batch size that is right for you.

How to Determine The Dosing

Want to get a more accurate guesstimate of the potency of your cannabis infusions and extractions? Try our popular edibles calculator!

Not sure what your perfect dose is? Learn more here.

Want To Make This Easier? Use A Machine!

If the process of decarbing and infusing feels like too much work, an all-in-one countertop device may be a perfect all-in-one solution.

My personal favorites? The LEVO and Ardent FX, but you can review the most popular infusion machines here.

Want A Discount Code?

Recipes To Make With Your Oil

My Edibles Made Easy Online Cooking Course will teach you how to easily make cannabis edibles and topical recipes at home. This step-by-step video course will teach you how to infuse, extract, and create edibles with many different product types – all from the comfort of your own home.

Learn more and enroll today →

Easy Crockpot Cannabis Coconut Oil

This easy, step-by-step beginner’s guide will teach you how to make cannabis coconut oil at home in a crockpot. It is perfect for anyone who wants to learn how to make a cannabis-infused oil that is vegan, dairy-free, and versatile enough to be used as a base for recipes and self-care products.

Equipment

Ingredients

  • ▢ 1 ounce cannabis flower pre-decarb
  • ▢ 16 ounces coconut oil
  • ▢ 1 teaspoon liquid sunflower lecithin optional

Instructions

Lay a clean tea towel down on the bottom of your crockpot. This will create a buffer between your mason jars and the crockpot, potentially preventing any jar from moving or cracking during cooking.

Fill your crockpot with enough warm to hot water to cover the top of the mason jars you plan on using by an inch to create a water bath.

Place the digital instant-read thermometer into the water. Start the crockpot heat on high. When a temperature of 185° F is reached, turn the crockpot to low.

While the water bath is heating in the crockpot, measure and decarb the cannabis flower in the oven at 240°F for 40 minutes (for THC-flower). Click here for a full cannabis decarboxylation tutorial, if needed.

Evenly divide the coconut oil between the mason jars you plan on using. You can either use pint-sized or half-pint-sized jars, it’s you’re preference, just be sure they fit in your crockpot. No matter the size, be sure to leave a ½ inch headspace from the top.

See also  CBD Oil For Fibroids

Evenly divide the decarbed flower between the coconut oil-filled jars. Wipe the rim of the jars with a clean paper towel and place the lid on. Tighten the metal ring to finger-tip tightness, it does not have to be tightened all the way. Do not tighten too tightly.

Once the water bath reaches a temperature of 185° F, carefully place the jars into the water bath. Place the lid on the crockpot and leave alone to infuse for 4 hours.

After 4 hours, carefully remove the lid, followed by the jars from the hot water. Set them aside to cool.

Once cool enough to handle, you will want to strain the cannabis oil through a paper filter and funnel, cheesecloth, or French press to separate the plant-matter from the coconut oil.

Save the leftover cannabis pulp for use in future recipes. Then return the prepared cannabis coconut oil to whatever jar you would like to store it in. We use a mason jar.

Store the prepared cannabis coconut oil in a cool, dry place. It will last longer if stored in the refrigerator and even longer if stored in the freezer.

Notes

  • Yield: ~16 ounces / ~2 cups
  • Temperature Control: The water bath does not need to stay perfectly at 185° F the entire time. Any temperature between 170°-190°F is OK.
  • Safety First: I recommend you sanitize your jars by keeping them submerged in the 185° F crockpot for 10 at least minutes. This step is not necessary, but good practice for safety and hygiene.
  • Floating Jars: Sometimes the mason jar will float when placed in the water bath. This is no need for concern, simply put something heat and water safe over the top of the jar to weigh it down, a clean rock works well.
  • Alternative Carrier Oil Options Include:
    • Avocado oil
    • Hemp seed oil
    • Grapeseed oil
    • Coconut oil

    Nutrition

    Did you make this recipe or have a question? Join hundreds of members inside private Well With Cannabis Community for help, support, and to share your edible creations!

    Reader Interactions

    Comments

    June 08, 2022 at 4:18 pm

    My crockpot only gets to 155f
    Will be this enough heat? I’m using refined coconut oil.
    How much longer would you recommend and lids should be lightly on?

    June 09, 2022 at 9:46 am

    Hey Chris! I don’t have lab tests to say for sure how much longer, but I would maybe add another hour or two? And lids on lightly, you don’t want them too tight, but you don’t want any water to get in, either

    June 27, 2022 at 8:39 pm

    If all i have in a regular oven, what temp should i set it to to keep the water around 180°?

    Ive done then before years ago with using your recipe but i used the oven and cant remember what i set my temp to, but i slow infused it for 6 hours. Everyone loved the final product

    June 28, 2022 at 1:04 pm

    Hey Matt, I haven’t done it this way before, but I would set the oven as low as it would possibly go – I think mine goes as low as 200°F? Let us know if it works for you!

    July 13, 2022 at 2:09 pm

    I’ve been reading you articles and watched videos. You are very informative ( I’ve really been enjoying my edibles). I have an ardent lift decarb machine. It turns off automatically. I am very interested in turning my thc into cbn. Can I safely achieve this? If yes please advise.

    July 14, 2022 at 10:46 am

    Hey Glenn! Thanks for reading and watching. My Ardent FX manual says you can simply run the THC decarb setting twice to get to CBN

    August 07, 2022 at 9:35 am

    Hi! I just made this recipe and it was super fun and easy. I have a question, my oil didn’t solidify after cooling which I find strange?! I used organic virgin coconut oil cold pressed unrefined- it’s in a solid form. Is it normal that my cannabis infused oil didn’t solidify after ?

    August 07, 2022 at 9:54 am

    Hey Karina! Thanks so much; I’m glad you found it fun and easy. This is normal, and with coconut oil as it cools, sometimes it even looks like little balls of oil. Totally normal; it will solidify eventually. You can always put it in the fridge to speed up the process if you want

    August 15, 2022 at 11:42 am

    Hypothetical question, what if you fell asleep and the oil cooked in the crockpot for about 10ish hours, would it be ruined?

    August 15, 2022 at 1:01 pm

    Hey Mtartar, no, it would not be ruined If anything it may look and taste more green, and you may have a more sleepy end product, but it’s definitely not ruined!

    August 21, 2022 at 2:10 pm

    Hi there! I love your video. It may sound silly, but where do you buy cannabis flower to make the infused coconut oil? Thanks!

    August 21, 2022 at 5:54 pm

    Hello Ernestine, thanks so much for the kind words! No silly questions here I have both CBD and CBG flower for sale in my shop, and for THC flower I grow my own. Availability and legality will depend on what state you’re in, I hope this helps!

    September 08, 2022 at 11:37 am

    If you’re making the infused coconut oil with FECO to use as a topical, what would the ratio be, and do you need to heat it as long in the crockpot? Total newbie here; looking forward to trying it. Your website has been so instructional. Thanks!

    September 08, 2022 at 2:48 pm

    Hey Jen! The ratio will be totally up to you and how potent you want. FECO is basically already ready to use, so when you’re adding coconut oil, you’re just doing it to expand the volume, but this will dilute the consistency. If you want it super potent, don’t add a lot of oil. If you want to make it less potent, add more oil. If you know the potency of the FECO, you can use the edible dosage calculator to play around with the volume of coconut oil to see how it impacts the overall mg

    September 13, 2022 at 6:41 am

    Hey Karina. If you have 48 pieces and you want them (average) 20mg each, you’ll need 960mg THC to start (48×20=960). Next, you will need to know the % THC in you’re starting material. If you don’t know that, an average number I will use for this example is 15% THC. At 15% THC, you will get 150mg THC per gram, so you will need 6.4 grams of flower (960/150) to get to your desired amount of 960mg THC total. I hope this makes sense!

    September 13, 2022 at 7:12 am

    Hi Emily! While I am not new to consuming edibles I am new to making my own. I read the article about calculating the doses but I am still confused as to how much flower you use per coconut oil to achieve a stronger oil. I did a trial run for your gummies recipe and it made 48 1 teaspoon gummies and 48 2 teaspoons gummies. If using this recipe how much flower would you recommend for the coconut oil? I am trying to get the gummies on the stronger side. 15-25mg?

    Thanks for coming! Let me know what you think:

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Primary Sidebar

    Hello, I’m Emily Kyle. I help people just like you sort through misinformation, conquer fears, and find support on your cannabis journey.

    Shop The Store

    Visit my online cannabis store to find the highest quality cannabis products, including flower, oils, gummies, topicals, and more!

    How useful was this post?

    Click on a star to rate it!

    Average rating 5 / 5. Vote count: 1

    No votes so far! Be the first to rate this post.